The Biostar M7NCD Pro is a performance-oriented motherboard utilizing the nVidia nFORCE2 400 Ultra/MCP chipset. Its 400 MHz front side bus, 128-bit Dual DDR memory architecture, and overclockability satisfy even the most demanding power users. With support up to Athlon XP 3200+ and 3 GB of DDR SDRAM, this is one powerful motherboard!

General Features
- nVidia nForce2 Ultra 400/MCP chipset
- ATX
- Socket A
- 400 MHz front side bus (FSB)
- PCB version 1.1
- Three (3) 184-pin DDR DIMM Ram Slots
- Supports up to 3 GB DDR RAM (200/266/333/400)
- Two (2) dual channel UDMA/133 IDE controllers
- One (1) dual channel floppy controller
- Realtek RTL8201BL PHY integrated Ethernet controller
- Realtek ALC650 6-Channel AC'97 CODEC integrated audio

--> Expansion Slots: - One (1) 8x/4x AGP slot
- Five (5) PCI slots
- Three (3) 184-pin DIMM slots

--> I/O Ports:
- Two (2) PS/2 ports
- Two (2) 9-pin standard serial ports
- One (1) 25-pin standard parallel port
- One (1) 15-pin standard game/midi port
- Six (6) USB 2.0 ports (two on back, four via header)
- One (1) RJ-45 standard Ethernet jack
- Line-in, microphone and line-out jacks

--> Supported Processors:
- AMD Athlon XP up to 3200+ with 200 MHz FSB
- AMD Athlon XP up to 3000+ with 166 MHz FSB
- AMD Athlon XP up to 2600+ with 133 MHz FSB
- AMD Athlon up to 1.4 GHz
- AMD Duron up to 1.3 GHz

--> HARDWARE MONITOR FUNCTION
- CPU/system fan speed
- CPU voltage
- AGP voltage
- CPU temperature
- System temperature
- Vcore,+3.3V,+5V,+12V, -5V, -12V

--> WarpSpeeder:
- OverVoltage
- Hardware monitor

--> Retail Package Includes:
- Biostar M7NCD Pro Socket A motherboard
- USB 2.0 header for rear I/O
- Driver CD
- Application pack CD
- One (1) 40-pin, 80-wire IDE cable
- One (1) floppy disk cable
- User's Manual